ECO-WORTHY 2000W Portable Inverter Charger for RV Household Outdoor Camping
The hybrid inverter combines 2000W pure sine wave inverter and 25A MPPT solar charge controller with maximum 500W PV and 1000W AC input. It requires power storage by 24V LiFePO4 batteries. IN/OUT: 3AC outlets, 2USB 3.0 ports, 1Type-C port, 2DC5525 Outlets, 1Car Outlet. A variety of interfaces can meet the power needs of most electrical appliances. Five Protection function: Five protection functions, and when the protection starts with 3min buzzer alarm and LCD screen information flashing to remind the user.
It can quickly get the battery information, protection status, input and output information in real time. It reminds the user with a 3-min buzzer alarm and flashing data when the protection is activated. The inverter's size is 14.64.910.1inch and 15.2lb weight. It's equipped with LED lights, suitable for car, outdoor camping, and home use. Three Charging Methods: 2000W inverter, support maximum 500W PV charging, 1000W AC charging, hybrid charging, with 100AH 24V Li-ion battery, meet your different requirements.
Mini Size & Light Weight? ECO-WORTHY 24V 100Ah Lithium Iron Phosphate Battery's size is only 3/4 of other LiFePO4 battery, 2/3 of lead-acid battery(2PCS 100AH), which makes it more convenient to carry. Variety of mounting directions, and no risk of leakage, make it safer to use. Most RV need two batteries at least, the compact size makes it easier to place and connect in the battery box.ECO-WORTHY 24V 100Ah LiFePO4 battery can reach 3000+ deep cycles, which is equivalent to 6 lead-acid batteries. Can be used in parallel, more suitable for 24V solar panel kit, less wires, less heat loss and less balance issue. Replacement for Lead Acid Battery?
Our 24V 100Ah Lithium Iron Phosphate battery has high energy density. It weighs 39.2 pounds, which is only 1/3 of lead-acid battery(2PCS 100AH).Allowing for a longer RV driving range. Discharge of lead-acid battery below 50% will shorten battery life, while lithium battery will not.
Built-in BMS to protect it from overcharge, over-discharge, charge over-current, discharge over-current, short-circuit, cell voltage self balance, high-temp discharge cut off.